Sirius Satellite Radio Model Satellite Satellite Radio User Manual


 
10
GUIDE TO FEATURES (REMOTE CONTROL)
Note the remote control will not control the AM/FM portion of the Model Satellite.
For proper operation, always aim the remote control in the general direction of
the front panel IR sensor. Remove the clear plastic strip protruding from the
remote control prior to operation. For more detailed instructions, please refer to the
Front Panel Guide.
1. POWER: Press to power the unit On or Off (standby).
2. MENU: Press to access Menu options.
3. CH+/CH-: Press to navigate through the Menu, lists, or to change channels.
4. CAT </>: Press to access and advance through categorized channels based on content.
5. BAND: Press briefly to cycle between the 4 Sirius preset bands (A, B, C, and D).
Press and hold for Preset Tune mode to access the entire 4 banks of stored presets.
6. DIR: Press to enter a specific Sirius channel number using the numbered buttons
on the remote control.
7. DISP: Press to change the display from Normal (2-lines) to Large (1-line) text mode.
8. MEMO: Press briefly to save the currently tuned Sirius channel song and artist
information. Press and hold to review all stored listings.
9. #1-0: Press to enter a specific channel after pressing the DIR button. Also used
to set/recall preset channels within the currently tuned Band. To set a preset,
pr
ess and hold the number
ed button until a confir
mation beep is hear
d.
10
.
MUTE:
Pr
ess to silence the audio output when in the Sirius mode only
. Press
again to r
estor
e the audio output.
11. ENTER: Press to select a highlighted option.
6
2
4
3
11
5
8
7
9
1
10