Filter
Top Products
- 8 -
Taking the device into use
Take the device out of the carton and remove all packaging >
and adhesive foils.
Operation with the built-in Ni-MH batteries
First of all, charge up the built-in batteries. For this, fold out
>
the dynamo grip on the rear of the device and turn the
dynamo lever f for several minutes at approx. 120 revolu-
tions per minute in any direction.
Battery operation
The device can also be operated with batteries (not supplied).
Open the battery compartment on the rear of the device
>
by unscrewing and removing the lock-device on the battery
compartment cover h.
Now remove the battery compartment cover
> g and place it
to one side.
Insert 3 x 1.5V batteries of the type "AA/Mignon/LR6" as
>
per the insertion markings shown in the battery compartment.
Pay heed to the correct poling of the batteries, otherwise
>
the device will not function and could even be damaged.
Replace the battery compartment cover
> g and screw it
down rmly with the lock-device h.
Connecting the mains adapter
You can operate the device with a power adapter (not supplied)
that concurs with the specications given in the section "Technical
Data".
Using a ngernail, open the rubber cover
> j.
Insert the barrel plug of the power adapter into the socket
>
for the power supply (DC 4.5V) k on the device.