Filter
Top Products
19
English
Replacement Parts and Accessories
Furnished Accessories
Optional Accessories
Antenna Combiners and Accessories
• Antennas and receivers must be from the same frequency
band.
• The supplied 1/2 wave antennas can be remotely mounted or
mounted directly to the UA845.
• Antennas and cables for use with the UA845 can also be
used with stand-alone UHF-R receivers.
Architects' and Engineers' Specifications
The wireless system shall operate in the UHF band between 518 MHz and 865 MHz, with the specific range being dependent on the
user's locale. The system shall include the option of changing the operating frequency in order to avoid RF interference, enabling up
to 108 systems to operate simultaneously in the same location. Preconfigured group, channel and frequency setups shall be available
to ensure that multiple systems in use do not interfere with one another.
All transmitters shall be powered by 2 AA batteries and shall have a power on/off switch. The bodypack will have an LED indicating
that power is on. Available transmitters shall include: a body pack for use with electric guitars, basses, and other electric instruments,
and a handheld microphone for vocals. The transmitters shall have a DC/DC converter to ensure consistent performance, even if bat-
tery voltages change.
The receiver shall have a user-programmable, menu-driven LCD showing group, channel, frequency, name, squelch level, and
locked/unlocked status. The system shall use technology such as MARCAD
£
signal combining circuitry to improve reception, minimize
signal dropouts, and achieve the best possible signal-to-noise ratio. An equalizer, tone key squelch, and noise squelch circuitry shall
be built into the system to provide optimal sound quality and minimize unwanted noise. The receiver shall include dual RF meters (one
for each antenna), an audio level meter, and a Networking Interface connector for computer control and monitoring. The receiver shall
have a volume control and an adjustable noise squelch control.
The system shall be the Shure UHF-R Wireless.
Microphone Stand Adapter (UR2) WA371
Zipper Bag (UR1) 26A13
Zipper Bag (UR2) 26A14
Antenna Extension Cables (2) 95A9023
Hardware Kit, Locking Connector WA340
Antenna (UR1), 518-578 MHz UA710
Antenna (UR1), 578-698 MHz UA720
Antenna (UR1), 740-865 MHz UA730
Two Antennas (UR4), Band
Dependent (see table)
UA820
Transmitter Carrying Case 95A9053
SM58 Head with Grille RPW112
SM86 Head with Grille RPW114
BETA 58 Head with Grille RPW118
BETA 87A Head with Grille RPW120
BETA 87C Head with Grille RPW122
SM87A Head with Grille RPW116
KSM9/SL Head with Grille RPW180
KSM9/BK Head with Grille RPW184
Matte Silver Grille (SM58) RK143G
Matte Silver Grille (SM86) RPM266
Matte Silver Grille (BETA 58) RK265G
Black Grille (SM87) RK214G
Matte Silver Grille (BETA 87A) RK312
Matte Silver Grille (BETA 87C) RK312
Black Grille (BETA 58) RK323G
Black Grille (BETA 87A/BETA 87C) RK324G
Popper Stopper Windscreen A85WS
Belt Clip 44A8031
Body-Pack Pouch (Black), UR1 WA580B
Body-Pack Pouch (White), UR1 WA580W
Passive Antenna/Splitter Combiner Kit
(recommended for 2 receivers)
UA221
UHF Antenna Power Distribution Amplifier
(recommended for 3 or more receivers)
UA845-
U.S.A.
UA845US
Europe
UA845E
UK
UA845UK
1/2 Wave, Omnidirectional, Wideband
Antenna
UA860WB
Active Directional Wideband Antenna UA870WB
Wideband In-Line RF Amplifier UA830WB
Passive Unidirectional Wideband Antenna PA805WB
1/2 wave antennas (2)
H4E, H4 Bands
UA820H4
J5E, J5 Bands
UA820J
L3E, L3 Bands
UA820L3
Q5, Q6, Q10 Bands
UA820Q
R9, ABJ Bands
UA820A
25’ Antenna Cable (RG-8/X) UA825
50’ Antenna Cable (RG-8/X) UA850
100’ Antenna Cable UA8100