Filter
Top Products
8
Transmitters
① Power LED
- Green = unit is powered on
- Red = low battery
② On/Off Switch
Powers the transmitter on or off.
③ Display:
View menu screens and settings. Press any
control button to activate the backlight.
④ IR window
Align with the receiver IR window during an IR
sync for automated transmitter programming.
⑤ Menu Navigation Buttons
menu = Use to navigate between menu
screens.
▼▲ = Use to select menu screens, edit menu
parameters, or choose a home screen display
option.
enter = Press to confirm and save parameter
changes.
Tip: Press the menu button to exit without
saving parameter changes.
⑥ Battery Compartment
Requires 2 AA batteries or a Shure
SB900 rechargeable battery.
⑦ AA Battery Adapter
Secures batteries when powering
transmitter with AA batteries
instead of Shure SB900 battery.
⑧ Bodypack Antenna
For RF signal transmission.
⑨ Handheld Integrated Antenna
For RF signal transmission.
⑩ Microphone Cartridge
See Optional Accessories for a list
of compatible cartridges.
⑪ TA4M Input Jack
Connects to a 4-Pin Mini
Connector (TA4F) microphone or
instrument cable.
⑫ Battery Contact Cover
Align the cover as shown to
prevent reflections from the battery
contacts during broadcasts or
performances.
on
QLXD2
QLXD1
1 2
2
3
4
3
4
5
5
6
6
7
7
8
9
10
11
12
Battery Installation
AA Batteries Shure SB900 Battery
on
n
o
2D
X
LU
on
AA Adapter AA Adapter
① Accessing the Battery Compartment
Press the side tabs on the bodypack or unscrew the cover on
the handheld as shown to access the battery compartment.
② Installing Batteries
- AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown
- Shure SB900 Battery: Place battery as shown (note polarity markings), remove AA Adaptor from
bodypack transmitter, stow AA Adaptor in door for handheld transmitter
Note: If using AA batteries, set the battery type using the transmitter menu.
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in the transmitter
menu to match the installed AA battery type. If a Shure SB900 rechargeable battery is
installed, selecting a battery type is not necessary and the battery type menu will not
be displayed.
1. Press the menu button to navigate to the battery icon.
2. Use the ▼▲ buttons to select the installed battery type:
- AL = Alkaline
-
nH = Nickel Metal Hydride
-
Li = Lithium Primary
3. Press enter to save.
AA Battery Installation
Fully insert the batteries as shown to ensure proper battery contact and to
allow the door to latch securely.
Correct
Incorrect