Shure psm400 Headphones User Manual


 
ENGLISH
5
INTRODUCTION
The PSM
R
400 Wireless Personal Performance Pack
Thank you for buying the Shure PSM
400 Wireless Personal Performance Pack, featuring the P4M Personal Monitor Mixer, the P4T
Transmitter, the P4R Receiver and earphones. Like all Shure PSM personal monitoring products, the PSM 400 provides the many
advantages of a wireless, in-ear monitoring system, including:
S Improved Sound Quality – high fidelity without the risk of feedback,
S Increased Mobility – your mix moves with you,
S Personal Control – through volume adjustment and MixMode
R
.
For information on this and other Shure products, visit www.shure.com on the World Wide Web.
FREQ
MIX
EQ
LIM
1. Plug in the PS41 power supply and connect it to
mixer’s DC IN connector. Connect mixer’s DC
OUT connector to transmitter’s DC input.
2. Attach the antenna to the ANTENNA OUT BNC
connector.
3. Connect mixer’s 1/L and 2/R MIX OUT jacks to
transmitter’s 1/L and 2/R INPUT jacks.
4. Connect audio sources to mixer’s MIC/LINE IN-
PUTS.
5. Mix audio sources using LEVEL/PAN knobs. Use
outer ring to pan signal left or right, and use inner
knob to adjust signal level.
6. Check signal/clip LEDs.
7. Insert battery into receiver.
8. Turn receiver volume knob past click (ON). Keep volume at
minimum.
9. Set receiver functions (see P4R Receiver on page 10).
10. Set transmitter and receiver to same frequency channel.
PSM 400 Quick Set-Up Guide
11. Check RF symbol on receiver LCD to confirm RF reception.
12. Insert earphones into earphone jack on the receiver. Insert earphones into your ears.
13. Slowly increase receiver volume to a comfortable level.