Filter
Top Products
ENGLISH
14
APPLICATION THREE: One P4M Mixer/Two P4T Transmitters
P4M
Level/Pan
Knobs 1–4
Mix
Outputs
PSM
RECEIVER
RF Transmission
RF Reception
Mixing
Console
Inputs 1–4
Split
Outputs
Monitor Mix
Mix 1/L
Mix 2/R
Other Audio
Sources
Personal Monitor Mixer
To Mixing
Console
Monitor Mix
Transmitter
PSM
Line
Inputs
LOOP
Outputs
PSM
Transmitter
Line
Inputs
PSM
RECEIVER
This configuration, using the P4M’s SPLIT OUTPUT and a PSM transmitter’s LOOP OUTPUT, allows one P4M to provide custom mixes to two PSM transmit-
ters, and is recommended for small ensembles in live performance:
1. Connect up to four microphones or instruments into the P4M inputs. Connect the SPLIT OUTPUTS to a mixing console.
2. Connect a monitor mix from a mixing console to the first P4T transmitter.
3. On the first PSM transmitter, connect the LOOP output containing the monitor mix to an input on the second PSM
transmitter.
4. Connect a MIX OUT output to each transmitters’ remaining input. Use the front-panel PAN knobs to balance input signals
between the two transmitters.
5. Place the PSM receivers in MixMode. Use the balance wheel on the PSM receiver to blend the monitor mix with the cus-
tom mix created by the P4M.