Filter
Top Products
5
MixMode and Stereo Monitoring
MixMode
To operate in MixMode, enter the menu and select AUDIO > MODE > MIXMODE.
In MixMode, the blend between two monitoring mixes (an instrumental mix and a vocal mix, for example) is adjustable. The signal is mono, which
means each mix is heard through both the left and right earphones.
Adjusting mix blend
To adjust the blend between channel 1 and channel 2, enter the menu and select AUDIO > BAL MX. Use the arrow buttons (▲▼) to make
adjustments.
In this scenario, an instrumental mix is on channel 1 (left) and a vocal mix is on channel 2 (right):
Left (Channel 1)
Right (Channel 2)
Adjusting Balance
To adjust the left/right balance, select AUDIO > BAL ST. Use the ▲▼ buttons to
change the setting.
MIXMODE
10L
Instruments
Vocals
Instruments
Vocals
MIXMODE
10R
Instruments
Vocals
Instruments
Vocals
To hear more of channel one (instruments),
shift the balance towards the left.
To hear more of channel two (vocals), shift
the balance towards the right.
The bodypack can operate in either of the following listening modes:
Stereo (default)
To operate in stereo mode, enter the menu and select AUDIO > MODE > STEREO .
In stereo mode, audio from channel 1 is heard on the left earphone, while audio
from channel 2 is heard on the right earphone. Listening in stereo increases
clarity and separation between the sources on each channel.
Balance and Mix Adjustments from the Home Screen
To make quick adjustments to the stereo balance or MixMode blend, use the arrow buttons (▲▼) while in the home screen. If necessary, use
the lock feature to prevent any accidental adjustments.