Filter
Top Products
3
General Description
The Shure P3RA bodypack receiver works with Shure P3T transmitters as part of the PSM
®
300 stereo personal monitoring system. An advanced
user menu featuring an LCD display delivers increased functionality over the standard PSM300 bodypack receiver, while an all-metal housing
provides superior durability. Compatibility with the Shure SB900 rechargeable battery delivers improved battery life and provides an environmentally
friendly way to save money and reduce waste.
For more information on using the P3RA with the PSM300 system, refer to the PSM300 user guide (included with the transmitter and available at
shure.com).
P3RA Bodypack
① Antenna
Receives signal from P3T transmitter
② RF Indicator
Illuminates when the bodypack is receiving
a signal from the transmitter
③ Volume Knob / Power Switch
Turn to power on/off and adjust headphone
volume
④ Battery LED
Indicates battery status
Note: see the battery life table for specific runtime
values
⑤ Headphone Output
Use earphones or headphones with a 3.5
mm (1/8-inch) plug
⑥ Display
Shows settings and menu navigation
⑦ Navigation buttons (▲▼)
Use to scroll through menu and adjust
settings
ྙ ྚ ྛ ྜྜྷ
ྞ
ྟ
ྠ
ྡ
ྡྷ
ྣ
ྤ
ྥ
⑧ Exit button
Press to return to previous screen
⑨ Enter button
Press to enter a menu screen or to
confirm a setting
⑩ IR Sync Window
Use to send group and channel settings
between the bodypack and transmitter
⑪ Scan Button
Press to perform an RF scan
⑫ Battery Compartment
Uses a Shure SB900 rechargeable
battery or two AA batteries
⑬ Removable AA Adapter
Remove to use with a Shure SB900
rechargeable battery
Note: To remove, open the door and slide the
adapter out. To reinstall, press the adapter
into place—there is an audible click when
seated.
P3RA