EENNGGLLIISSHH
20
RECORDING
Start recording on the Tape Deck connected to
the TAPE MONITOR input.
2
Select the desired input as recording source
except for TAPE MONITOR.
1
RReeccoorrddiinngg wwiitthh TTAAPPEE MMOONNIITTOORR
Select VCR 2 or DVD as recording
source.
1
DDuubbbbiinngg ffrroomm vviiddeeoo ccoommppoonneennttss oonnttoo
VVCCRR 11
Select DVD as video recording source.
1
DDuubbbbiinngg tthhee aauuddiioo aanndd vviiddeeoo ssiiggnnaallss
sseeppaarraatteellyy oonnttoo VVCCRR 11
Start play on the desired input.
3
Select CD as audio recording source.
2
Be sure that “TAPE M” goes off.
For tape monitor function, refer to “TAPE
MONITOR function” on page 10.
Start recording on the VCR 1.
2
Start play on the VCR 2 or the DVD.
3
The audio and video signals from the VCR 2 or the
DVD will be dubbed onto the VCR 1 and you can
enjoy them on the TV set and from the speakers.
Example) When dubbing the DVD video signal and
the CD audio signal separately onto VCR 1.
The analog signals from the 6 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital
input can be heard but cannot be recorded.
The volume and tone (bass, treble) settings, etc. have no effect on the recording signals.