Filter
Top Products
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off, are memorized.
• INPUT SELECTOR settings
• Preset stations,etc.
• Tone (treble and bass) and balance settings.
Scanning preset stations in sequence
• The receiver will start scanning the stations in the
preset sequence and each station is received for 5
seconds.
• At the desired station, press this button again to
stop scanning.
Tuning in preset stations
4. Repeat the above steps 1 to 3 to memorize other stations.
• After selecting the tuner as an input source,
select the desired preset number.
16
Presetting radio stations
• You can store up to 30 preferred stations in the memory.
• The "M" (memory) is flickering for 5 seconds.
1. Tune in the desired station with auto or manual tuning.
2. Press the MOMORY button.
• The station has now been stored in the memory.
• A stored frequency is erased from the memory by storing another frequency in its place.
• If the "M" disappears, start again from the above step 2.
3. Select the desired preset number (01~30) and press the MEMORY button.