Sherwood RX-772 Stereo Receiver User Manual


 
9
1. POWER SWITCH
Push this switch to enter the standby mode.
To switch the power off, push again this switch.
2. POWER ON BUTTON
In the standby mode, when this button is pressed, the
unit is turned on to enter the operating mode.
When the BAND button on the front panel is pressed,
the unit is turned on, too.
3. STANDBY BUTTON
In the operating mode, when this button is pressed, the
unit is turned off to enter the stnadby mode.
4. STANDBY INDICATOR
5. HEADPHONE JACK
Stereo headphones with a standard 1/4 inch plug can be
plugged into this jack for private listening.
6. INPUT SELECTOR KNOB/BUTTONS
Rotate the INPUT SELECTOR knob or press the button
to select the desired input source.
7. BAND BUTTON
Each time this button is pressed, the band changes as
follows.
FM STEREO FM MONO AM
8. SPEAKER A, B SELECTOR BUTTONS/INDICATORS
These buttons allow you to select various combinations
of speakers as follows:
To drive A speakers, press only the SPEAKER A but-
ton ("A" indicator lights up).
To drive B speakers, press only the SPEAKER B but-
ton ("B" indicator lights up).
To drive both A and B speakers, press the SPEAKER
A and B buttons.("A" and "B" indicators light up).
When using headphones for private listening, press
these buttons to switch off the speaker A and B ("A"
and "B" indicators go off).
9. DIMMER BUTTON
Press this button to select the brightness of the
fluorescent displays as desired.
Each time this button is pressed, the brightness of all
fluorescent displays of this unit and Sherwood CD
player shch as CD-772, etc. connected by the DIGI
LINK changes together as follows:
ON dimmer OFF
10. SLEEP BUTTON
Press this button to activate the sleep timer for a
specified period of time.
Each time this button is pressed, the sleep time
changes as follows:
10 20 30   90 OFF
Unit : minutes
11. TONE BUTTON
Press this button to listen to a program source with the
tone effect or not.
12. TREBLE UP/DOWN (
/
) BUTTONS
Adjust the treble as desired with these buttons.
13. BASS UP/DOWN (
/
) BUTTONS
Adjust the bass as desired with these buttons.
14. VOLUME CONTROL KNOB, UP/DOWN (
/
)
BUTTONS
Adjust the volume to a comfortable listening level with
this knob or these buttons.
15. MUTE BUTTON
Press this button to temporarily mute the sound.
Press again to resume the previous sound level.
16. MEMORY BUTTON
Press this button to store stations.
17. TUNING UP/DOWN (
/
+/-) BUTTONS
Press these buttons to tune in the desired stations.
18. PRESET UP/DOWN (
/
+/-) BUTTONS
Press this button to select the preset stations.
19. PRESET SCAN BUTTON
Press this button to scan the stations in the preset
sequence.
20. MODE BUTTON
Each time this button is pressed, the mode changes as
follows :
SPEAKER (TONE : ON BASS TREBLE) or
BALANCE ( TONE : OFF)
21. SELECT KNOB
At the desired mode, rotate this knob to adjust it as
desired.
22. FLUORESCENT DISPLAY
23. REMOTE SENSOR
24. RDS BUTTONS (Regional option for Europe, etc.)
Use these buttons when listening to RDS broadcast.
For more information, refer to pages 17~19.
25. CD PLAYER SECTION
- to stop play

- to pause play
- to begin play
REPEAT - to play a track, disc, etc. repeatedly
REPEAT A/B - to play a specific part (A to B)repeatedly
, 
- to skip backward or forward