Sherwood RX-4109 Stereo Receiver User Manual


 
5
System Connections
• Do not plug the AC input cord into the wall AC outlet until all connections are completed.
• Be sure to connect the white RCA pin cords to the L (left) and the red RCA pin cords to the R (right) jacks when
making audio connections.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
• If the electricity fails or the AC input cord is left unplugged for more than several days, the memorized contents
will be cleared. Should this happen, memorized them again.
Change the position of the FM indoor antenna until
you get the best reception of your favorite FM stations.
• A 75 outdoor FM antenna may be used to further
improve the reception. Disconnect the indoor antenna
before replacing it with the outdoor one.
• Place the AM loop antenna as far as possible from the
receiver, TV set, speaker cords and the AC input cord
and set it to a direction for the best reception.
• If the reception is poor with the AM loop antenna, an
AM outdoor antenna can be used in place of the AM
loop antenna.
Note
•Do not connect the turntable with MC type cartridge
directly. If so, use a separate head amplifier or step-up
transformer.
1.
CONNECTING ANTENNAs
2. CONNECTING PHONO