Sherwood RX-4109 Stereo Receiver User Manual


 
15
Operating the sleep timer
The sleep timer allows the
system to continue to
operate for a specified
period of time before
automatically shutting off.
To set the receiver to
automatically turn off after
the specified period of
time.
Each time this button is pressed, the sleep time
changes as follows:
10 20 30 60 90 OFF
Unit : minutes
While operating the sleep timer, “ ” lights up.
When the sleep time is selected, the fluorescent
display is dimly lit.
OTHER FUNCTIONS
RECORDING
Recording with TAPE Recording with AUX
The volume, tone(bass, treble) and balance settings have no effect on the recording signals.
When you select tuner, CD or PHONO as a recording source, recording may be made on TAPE or AUX, or both
simultaneously.
Each time this button is pressed, the
brightness of the fluorescent display changes
as follows:
ON dimmer OFF
In the display OFF mode, pressing any button
will restore the display ON mode.
Adjusting the brightness of the
fluorescent display
1. Select the desired input as a recording
source except for TAPE.
1. Select the desired input as a recording
source except for AUX.
2. Start recording on the TAPE. 2. Start recording on the AUX.
3. Start play on the desired input. 3. Start play on the desired input.