Filter
Top Products
13
Presetting radio stations
• Manual tuning is useful when you already know the
frequency of the desired station.
• Perform the steps 1 and 2 in “Auto tuning” procedure
on page 12 and press the TUNING/PRESET UP (
) or DOWN ( ) button repeatedly until the right
frequency has been reached.
• You can store up to 30 preferred stations in the memory.
• “MEMO” is flickering for 5 seconds.
Manual tuning
1. Tune in the desired station with auto or manual tuning.
2. Press the MEMORY button.
3. Select the desired preset number (1~30) and press the MEMORY button.
4. Repeat the above steps 1 to 3 to memorize other stations.
• When using the NUMERIC buttons on the remote
control.
Examples) For “3” :
For “15” :
For “30” :
• The station has now been stored in the memory.
• When using the NUMERIC buttons, the station is
stored automatically without pressing the MEMORY
button.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If “MEMO” goes off, start again from the above step 2.
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off, are memorized.
• INPUT SELECTOR settings
• Preset stations,etc.
Note
• If the electricity fails or the AC input cord is disconnected for more than several days, they are all cleared. So
you should memorize them again.