Filter
Top Products
AMPLIFIER
DOLBY 3 STEREO : Choose this setting to play back
movies and music (especially Laser discs, video cassettes
and TV broadcasts with DOLBY SURROUND sound )when
not using the rear speakers.
You get a clear perception of the positionand direction of the
sound
DOLBY 3 STEREO combines the front and rear signals so
that you can enjoy a regenerated sound field which has
comparatively more lively presence and a more expansive
feeling from the three front channels (front left, front right
and center speakers) than that of ordinary stereo
regeneration.
THEATER : Use this when watching movie sources that
have a stereo soundtrack to enjoy the effect of being in a
movie theater.
HALL : Hall mode works best for recorded concerts and
other music programs. In this mode, the front speakers
provide a normal stereo effect while the rear speakers
provide a reverberated sound. This reverberation helps to
simulate the sound you might hear at a live concert.
SIMULATED : The "SIMULATED" creates effects of
reverberated and reflected sound from the walls and ceiling
similar to a concert hall. These sound effects added to the
actual sound from the source make you feel as if you are in
a more expanded space.
Choose the SIMULATED mode if the source sound signal is
mono.
OFF : Turns off the center and rear speakers for normal
stereo operation.
Note : Dolby Pro Logic, Dolby 3 Stereo, Theater, Hall and
Simulated will not work properly if the signal passes through
a graphic equalizer. Please refer to your equalizer operating
instructions for guidance on switching off (or defeating) the
equation.
SURROUND MODE CONTROL
Each surround mode has programmed values for center-
mode, center and rear levels and/or for rear channel time
delay (as appropriate).
These values will then be kept in the memory until they are
changed again.
The various values that can be adapted in the different
surround modes are described next:
DOLBY PRO LOGIC :
Press DOLBY PRO LOGIC or use the SURROUND
MODE button on the remote control.
Press the CENTER MODE button to select the required
center channel mode :
NORMAL – If the center speaker is smaller model, which
means it will not reproduce bass as deep or as loud as the
left and right speakers.
WIDE – If all three front speakers are identical and
capable of reproducing low bass information, and if equal
power is available in the left, center and right amplifiers.
PHANTOM – If no center speaker is installed.
Use the REAR LEVEL buttons to adjust the rear level
(related to the front level).
– REAR 0 dB lights up on the display.
– The level will be indicated on the display : MIN, –19,
0 , +9, MAX.
the DELAY TIME button on the remote control to
adjust the delay time of the rear channel.
– The delay time is changed as below, when it is pressed in
succession.
Use the CENTER LEVEL buttons to adjust the
center level.
– CENTER 0 dB lights up on the display.
– The level will be indicated on the display : MIN, –19,
0 , +9, MAX.
DOLBY 3 STEREO
Press the DOLBY 3 STEREO or use the SURROUND
MODE button on the remote control.
CENTER MODE : In Dolby 3 Stereo mode, you can only
select NORMAL and WIDE.
REAR LEVEL : Adjusting the rear level is not available in
Dolby 3 Stereo mode.
CENTER LEVEL : Use the CENTER LEVEL buttons to
adjust the center level as described above.
DELAY TIME : adjusting the delay time of the rear channel
is not available in Dolby 3 stereo mode.
THEATER, HALL, SIMULATED
Press the THEATER, HALL or SIMULATED respectively
or use the SURROUND MODE button on the remote
control.
CENTER MODE and CENTER LEVEL are not available in
these modes.
Use the REAR LEVEL buttons to adjust the rear level
(equal to the front level)
– REAR 0 dB lights up on the display.
– The level will be indicated on the display : MIN, –19, 0
, +9, MAX.
Use the DELAY TIME button on the remote control to
adjust the delay time of the rear channel as described
above.
– The delay time is changed as below, when it is pressed in
succession.
TEST TONE
Use the TEST TONE function on the remote control to
obtain the correct balance between the levels of the left,
right, center and rear speakers in the DOLBY PRO LOGIC
and DOLBY 3 STEREO mode.
DOLBY PRO LOGIC
Press the TEST TONE button on your remote control.
You will hear a test tone from the left (FL), center (C), right
(FR) and rear (R) speakers in turn, in repeating a cycle.
While sitting in the usual listening position, adjust the level
of the center and the surround channels to get the same
sound level with the front channel.
– The levels will be indicated on the display .
When you are satisfied with the levels, press the TEST
TONE button on your remote control again to turn off the
test tone.
DOLBY 3 STEREO
In the Dolby 3 Stereo mode you can adjust only the levels of
the left, right and center speakers.
Manufactured under license from Dolby Laboratories
Licensing Corporation. "Dolby", and "PRO LOGIC"
are trademarks of Dolby Laboratories Licensing
Corporation.
9
ENGLISH
15 ms
20 ms 25 ms
30 ms
5 ms
10 ms 15 ms
30 ms 25 ms
20 ms