Filter
Top Products
P R E C A U T I O N S
1
Thank you for purchasing this fine product – STEREO TURNTABLE.
Taking time to read these operation instructions carefully.
Read this manual carefully before using the unit and be sure to store the manual in a safe place for future reference.
1. Power sources
This product should be operated only from the type
of power source indicated on the marking label. If
you are not sure of the type of power supply to your
home, consult your product dealer or local Power
Company.
2. Installation precautions
Do not install the unit in any of the following
locations since this may result in a deterioration in
performance or malfunction:
• Locations exposed to direct sunlight or near
object radiating heat such as heating
appliances.
• Locations exposed to moisture or humidity.
• Cartridge may pick up slight sound pressure or
vibrations of the speakers coming along the
floow or though the air resulting in feedback or
howling sound. Find a location which is very
stable and vibration free.
• The legs have functions for adjusting the height
of the unit itself. Adjust the legs to stabilize the
main body horizontally..
3. The model may not be able to perform at its best in
an extremely cold envirnment. The optimum
ambient temperature range is 0
o
C to 35
o
C.
1. Always clean the stylus both before and after
playing a record with a soft brush, and try to make
it a rule to clean the record with a soft brush and
try to make it a rule to clean the records with a
good quality cleaner.
2. Be careful not to make the turntable vibrate while
a record is playing, since this can result in
damage to the stylus and record.
3. When clanging over the headshell, clamp the
tonearm to the arm rest so that the tonearm shaft
is not strained in any way.
4. Place only one record at a time on the platter. If
two or more records are sacked on the platter, the
stylus will not make proper contact with the
grooves, and this will impair the quality of
reproduction.
5. Volatile materials should not be used, such as :
alcohol, thinner, benzone etc. They may remove
the painter or damage the lustre, please avoid.
OPERATION PRECAUTIONS