Filter
Top Products
2012/ October/
17
12_XL-UR14H_OM_EN.fm
E-10
EN
Listening to USB mass storage device/MP3 player
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
Note:
To pause playback:
Press the / button.
The following functions are the same as CD operation:
Page
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Note:
If USB memory device is not connected, “NO MEDIA” will
be shown on the display.
■ To play back USB/MP3 player
1
Press the FUNCTION button repeatedly to select USB
function. Connect the USB memory device that has
MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Select desired file to be played back by pressing the
or button.
3 Press the / button. Playback will start.
● File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
● Display content can be changed by pressing the
(CLEAR) DISP button.
XL-UR14
■ To remove USB memory device
1
Press the button to stop playback.
2 Press the button again and wait until “OK” is displayed.
3 Disconnect USB memory device from the USB terminal.
■ File Erase
1
At USB STOP condition, press or button to
select the desired MP3 or WMA file to be erased.
2 Press and hold down (CLEAR)/DISP button and the
display will show “ERASE ?”.
3 Within 10 seconds press STOP button to cancel or
press (CLEAR)/DISP button again to confirm the file
erase selection. “ERASING” will be displayed.
4 “COMPLETE” will be displayed for a few seconds once
erasing process is finished.
■ Folder Erase
1
At USB STOP condition (Folder mode on), press
PRESET ( or ) button to select the desired folder to
be erased.
2 Press and hold down (CLEAR)/DISP button and the
display will show “ERASE ?”.
3 Within 10 seconds press STOP button to cancel or
press (CLEAR)/DISP button again to confirm the folder
erase selection. “ERASING” will be displayed.
4 “COMPLETE” will be displayed for a few seconds once
erasing process is finished.