Sharp XL-1200 Stereo System User Manual


 
01/2/19 XL-1200(U)3.fm
21
CD Playback
- Programmed Play -
Programmed Play
By specifying tracks from 1 to 99, you can choose up to 20 selec-
tions for playback in the order you like.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR button on the remote control. The "MEMORY" indicator will
disappear and all the programmed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original program.
Notes:
z
Opening the CD compartment automatically cancels the pro-
grammed sequence.
z
Even if you press the POWER button to enter the stand-by mode
or the function is changed from CD to some other function, the
programmed selections will not be cleared.
z
During program operation, random play is not possible.
1
While in the stop mode, press the MEMORY/SET (MEM-
ORY) button to enter the programming save mode.
2
Within 30 seconds, press the or button to select
the desired track.
Selected track number Playback time
3
Press the MEMORY/SET (MEMORY) button to save the
track number.
Playback order Total playback time
4
Repeat steps 2 - 3 for other tracks. Up to 20 tracks can
be programmed.
5
Press the ( ) button to start playback.
To clear the programmed selec-
tions:
Press the CLEAR button on the remote
control while the "MEMORY" indicator
is flashing.
Each time the button is pressed, one
track will be cleared, beginning with the
last track programmed.