Sharp XL-1200 Stereo System User Manual


 
01/2/19 XL-1200(U)2.fm
20
CD Playback
- Listening to a CD / Repeat or Random Play -
Listening to a CD (continued)
To locate the beginning of a track
To locate the desired portion
Notes:
z
Normal playback will resume when the or button is
released.
z
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, playback will start when you release the button.
z
The or button on the remote control allows you to locate
the desired portion.
Repeat or Random Play
You can select one of the CD playback mode; "Repeat play", "Ran-
dom play" and "Normal play".
To repeat a programmed sequence:
Perform steps 1 - 5 in the "Programmed Play" section and then
select the repeat playback.
Notes:
z
In random play, the CD player will select and play tracks automat-
ically. (You cannot select the order of the tracks.)
z
If you press the button during random play, you can move to
the track selected next by the random operation. On the other
hand, the button does not allow you to move to the previous
track. The beginning of the track being played will be located.
Caution:
After performing repeat or random play, be sure to press the but-
ton. Otherwise, the disc will play continuously.
To cancel repeat or random play:
Press the RANDOM/REPEAT button on the remote control repeat-
edly to select the normal playback mode.
To move to the beginning of the next track:
Press the button for less than 0.5 seconds during playback.
z
You can skip to any track by pressing the
button repeatedly until the desired track
number appears.
To restart the track being played:
Press the button for less than 0.5 seconds during playback.
z
You can skip to any track by pressing the
button repeatedly until the desired track
number appears.
For audible fast forward:
Press and hold down the button during playback.
For audible fast reverse:
Press and hold down the button during playback.
1
When in the CD mode, press the RANDOM/REPEAT
button on the remote control repeatedly to select the
playback mode.
Repeat playback mode Random playback mode
Normal playback mode
2
Press the button to start playback.