Sharp SW340 Stereo System User Manual


 
03/12/17 CD-SW340 02-43.fm
20
CD-SW340
CD or MP3/WMA disc Playback
Advanced CD or MP3/WMA disc playback (continued)
Direct track search
By using the direct search buttons, the desired tracks on the current
disc can be played.
Notes:
A track number higher than the number of tracks on the disc
cannot be selected.
During random play, direct search is not possible.
To stop playback:
Press the (CD ) button.
Repeat play
Repeat play can play all 5 discs, all tracks on a chosen disc, or a
programmed sequence continuously.
To cancel repeat play:
Press the / button again. “ ” will disappear.
Random play
The tracks on the disc(s) can be played in random order automatically.
To cancel random play:
Press the / button. “R” will disappear.
Notes:
If you press the button during random play, you can move to
the next track by the random operation. However, the button
does not allow you to move to the previous track. It will go to the
beginning of the current track instead.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
(CD ) button. Otherwise, the disc(s) will play continuously.
Use the direct search buttons on
the remote control to select the
desired track while playing the
selected disc.
Selected track number
The direct search buttons allow you to select up to number 9.
When selecting number 10 or higher, use the “+10” button.
A. For example, to choose 13
1 Press the “+10” button once.
2 Press the “3” button.
B. For example, to choose 130
1 Press the “+10” button three times.
2 Press the “0” button.
To repeat one disc:
Press the / button twice.
To repeat all tracks on up to 5 discs:
Press the / button three times.
To repeat desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page 21 and
then press the / button twice.
To random play all tracks on up to 5 discs:
Press the RANDOM button on the remote control.