Sharp CD-ES600 Stereo System User Manual


 
23
03/11/4 CD-ES600_66(U)3.fm
CD-ES600
TINSEA005AWZZ
CD-ES66
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2)
! Tape playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
" TAPE (1 2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
" / button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
Before playback:
" For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO tapes are not recom-
mended.)
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1 Press the ON/STAND-BY button to turn the power on.
2 Open the cassette com-
partment by pushing the
area marked " ".
3 Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac-
ing towards you.
4 Press the TAPE (1 2) button to select the cassette you
want to listen to.
5 Press the / to start
playback.
Tape play indicator
TAPE 1 TAPE 2
6