Sharp CD-ES600 Stereo System User Manual


 
18
03/11/4 CD-ES600_66(U)2.fm
TINSEA005AWZZ
CD-ES600
CD-ES66
CD Playback
Advanced CD playback
! To specify a disc to play
You can play a disc by specifying the disc number.
"
Playback will begin from track 1 on the chosen disc.
" After the last track on the chosen disc is played, the CD player
stops automatically.
Note:
If the button of the disc tray with no disc is pressed, playback will not
start and the disc indicator will go out.
To stop playback:
Press the button.
! Direct track search
By using the direct search buttons, the desired tracks on the current
disc can be played.
If the direct search buttons are pressed while the disc is stopped,
press the / button to start the desired track on the current disc.
Notes:
"
A track number higher than the number of tracks on the disc can-
not be selected.
" During random play, direct search is not possible.
1 Press one of the 1 - 5 buttons to select the desired disc.
Selected disc number
2 Within 5 seconds, press the DIRECT PLAY button on the
main unit.
Use the direct search buttons on
the remote control to select the de-
sired track while playing the se-
lected disc.
Selected track number
" The direct search buttons allow you to select up to number 9.
" When selecting number 10 or more, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.