Sharp CD-ES600 Stereo System User Manual


 
16
03/12/11 CD-ES600_66(U)2.fm
TINSEA005AWZZ
CD-ES600
CD-ES66
CD Playback
Listening to a CD (CDs)
This system can also play audio CD-R and CD-RW discs, but can-
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
! CD playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the 1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4 Place the CD on the disc tray 1, label side up.
Be sure to place 3" (8 cm) CD in the middle of the disc trays.
5 Press the OPEN/CLOSE button to close the disc tray 1.
Total number of tracks on
the CD whose number is
flashing
Total playing time of the
CD whose number is flash-
ing
" " will appear.
6 You can place discs on the trays 2 - 5 by following steps
3 - 5.
7 Press the / button to start playback.
CD play indicator
5" (12 cm) 3" (8 cm)