Sharp HTSB250 Speaker User Manual


 
E-5
Volume control
The sound level at a given volume setting depends
on unit efficiency, location, and various other
factors. It is advisable to avoid exposure to high
volume levels, which occurs while turning the unit
on with the volume control setting up high, or while
continually listening at high volumes.
Precautions (continued)
for any damage resulting from use of this
unit with a voltage other than that which is
specied.
The supplied AC/DC adaptor contains
no user serviceable parts. Never remove
covers unless qualied to do so. It contains
dangerous voltages, always remove mains
plug from the main outlet jack before any
service operation or when not in use for a
long period.
The AC/DC adaptor supplied with the HT-
SB250(BK) must not be used with other
equipment.
Never use an AC/DC adaptor other than the
one specied. Otherwise, problem or serious
hazards may be created.
Controls and indicators
Standard Indicator ..................................12
Cinema/Game Indicator .........................12
Information Display ................................12
Sport Indicator ........................................12
News Indicator ........................................12
On/Stand-by Button................................11
Volume Down Button .............................11
Volume Up Button ..................................11
Surround Button .....................................12
Function Button ......................................12
Remote Sensor
Left Front Speaker
Bass Reex Duct
Subwoofers
Right Front Speaker
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Reference page
Front Panel
disconnect the AC power cord from the AC
outlet. Plug the AC power cord back in, and
then turn on your system.
In case of an electrical storm, unplug the unit
for safety.
Hold the AC power plug by the head when
removing it from the AC outlet, as pulling the
cord can damage internal wires.
The AC power plug is used as a disconnect
device and shall always remain readily
operable.
Do not remove the outer cover, as this
may result in electric shock. Refer
internal service to your local SHARP
service facility.
This unit should only be used within the
range of 41°F - 95°F (5°C - 35°C).
Warning:
The voltage used must be the same as that
specied on this unit. Using this product
with a higher voltage other than that which
is specied is dangerous and may result
in a re or other type of accident causing
damage. SHARP will not be held responsible
12 13 13 1514 14
6
4 5
7 8 10 11
31 2
9