Filter
Top Products
37
CD-G10000
CP-G10000S
Advanced Features
Continued to the next page
4
Within 10 seconds, press the or button to se-
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
5
Press the or button to select "PLAY" or
"REC", and press the MEMORY/SET button.
The illustrations show the daily timer setting.
6
Press the or button to adjust the hour and
then press the MEMORY/SET button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7
Press the or button to adjust the minutes and
then press the MEMORY/SET button.
8 Set the time to finish as in steps 6 and 7 above.
White Red
Folder name
9
Switch input with the or button, and then
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
z
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY/SET
button.
z
If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be canceled.
10
Adjust the volume using the VOL. control, and then press
the MEMORY/SET button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.