Filter
Top Products
33
CD-DD4500
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Speaker level setting
The output level of each speaker can be adjusted.
1 Press the MENU button repeatedly to select “SP LEVEL”.
2 Within 8 seconds, press the ITEM button repeatedly to select the
speaker (CENT, RSUR, LSUR or SWFR) you want to adjust.
3 Within 8 seconds, use the SET UP (
WW
WW
W
or
XX
XX
X
) button on the re-
mote control to adjust the level.
You can change the level within a range of +10dB to –10dB, in 1dB steps.
Set Up (Continued)
Surround Operation
– Changing the Speaker Setting –
Front speaker balance setting
You can adjust the balance between the left and right channels of the front speakers.
1 Press the MENU button repeatedly to select “SP LEVEL”.
2 Within 8 seconds, press the ITEM button.
3 Within 8 seconds, press the SET UP
WW
WW
W
button to increase the
right speaker level (the left speaker level to decrease), or press
the SET UP
XX
XX
X
button to increase the left speaker level (the right
speaker level will decrease).
The speaker balance, as shown in the display, can be changed within the range
of “1” to “10”.
Note:
The surround speaker balance will not be changed.
To make the balance flat:
In step 3, use the SET UP (
W
or
X
) button on the remote control to select “F-SP CEN”.