Filter
Top Products
Delivery includes
5
Each of the channels in the frequency banks “1” to “20” has been factory-preset to a fixed
transmission frequency (frequency preset). The factory-preset frequencies within one
frequency bank are intermodulation-free. These frequencies cannot be changed.
For an overview of the frequency presets, please refer to the supplied frequency information
sheet. Updated versions of the frequency information sheet can be downloaded from the
corresponding product page on our website at www.sennheiser.com.
The frequency banks “U1” to “U6” allow you to freely select and store transmission frequen-
cies. It might be that these transmission frequencies are not intermodulation-free (see
page 22).
Areas of application
The transmitters can be combined with the EK 2000 IEM diversity receiver. For more informa-
tion, visit our website at www.sennheiser.com.
This receiver is available in the same UHF frequency ranges and is equipped with the same
frequency bank system with factory-preset frequencies. An advantage of the factory-preset
frequencies is that
• a transmission system is ready for immediate use after switch-on,
• several transmission systems can be operated simultaneously on the preset frequencies
without causing intermodulation interference.
Delivery includes
The packaging contains the following items:
1 SR 2000 IEM transmitter or 1 SR2050 IEM twin transmitter
3 mains cables (with EU, UK and US plug)
1 rod antenna (SR 2000 IEM) or 2 rod antennas (SR 2050 IEM)
1 instruction manual
1 frequency information sheet
1 RF licensing information sheet
4 self-adhesive device feet