Filter
Top Products
Putting the transmitter into operation
10
̈ Guide the BNC connector of the BNC extension cable through the hole in the rack mount
“ear” ³.
̈ Connect the BNC connector to the antenna output ƽ.
̈ Screw the antenna holder to the BNC socket ƿ using the supplied washer and
nut .
̈ Secure the antenna holder to the rack mount “ear” ³ of the transmitter using two of
the supplied screws.
If you are using the SR 2050 IEM twin transmitter:
̈ Mount the second BNC extension cable in the same way.
̈ Slide the transmitter into the 19” rack.
̈ Connect the rod antennas ƾ to the two BNC sockets ƿ.
ƿ
³
ƿ
ᕡ
³
³
1
ƿ
ƿ
ƾ
ƿ