Filter
Top Products
46
Muting the radiomicrophone
The radiomicrophone has a MUTE switch that noiselessly
mutes the audio signal without switching the
radiomicrophone off.
̈ Turn the protective cap ᕧ at the bottom of the
radiomicrophone so that the MUTE switch Ƹ becomes
accessible.
.
̈ Set the MUTE switch to the position ’MUTE’. The “MUTE”
display appears on the radiomicrophone’s display panel.
Provided that the pilot tone function is activated on
both the transmitter and the receiver, the “MUTE”
display also appears on the receiver display panel.
̈ Set the MUTE Ƹ switch back to the original position to
retransmit the audio signal.
Activating/deactivating the lock mode
The radiomicrophone has a lock mode that can be activated
or deactivated via the operating menu (see “Activating/
deactivating the lock mode” on page 55). The lock mode
prevents that the radiomicrophone is accidentally
programmed or switched off during operation.
¶
Ƹ