Filter
Top Products
43
̈ Push the battery compartment into the
radiomicrophone’s body.
̈ Screw the display section tight.
Note:
For accupack operation of the radiomicrophone, only use
the BA 2015 accupack in order to ensure optimum
operational reliability. For charging the accupack, only
use the L 2015 charger. Both the accupack and the
charger are available as accessories.
The accupack is fitted with an integrated sensor which is
– via a third contact – monitored by the electronics of
the radiomicrophone and the charger. The sensor is
necessary for the following control purposes:
y The taking into account of the different voltage
characteristics of primary cells (batteries) and
accupacks. The battery status indications on the
displays, the transmission of transmitter battery
status information to the rack-mount receivers and
the switch-off thresholds at the end of the operating
time are corrected correspondingly. Due to the
missing sensor, individual rechargeable battery cells
will not be identified as accupacks.
y The monitoring of the accupack temperature during
charging in the L 2015 charger.
Changing the microphone head
̈ First remove the batteries/accupack as described above
and leave the radiomicrophone open.
̈ Unscrew the sound inlet basket.
̈ Loosen the screw and put it to one side.