Filter
Top Products
44
̈ Gently ease the capsule out of the contacts and then pull
it out of the housing as shown. Do not touch the
contacts and the diaphragm!
̈ Insert the new capsule.
̈ Secure the capsule by tightening the screw.
Note:
The screw mechanically secures the microphone capsule.
If the screw is missing, malfunctions may occur during
tough use.
̈ Put on the sound inlet basket and identification ring
supplied with the new microphone head (NB: do NOT use
the old basket, as the different heads use slightly
differing internal foam) and screw it tight.
̈ Insert the batteries/accupack.
̈ Close the radiomicrophone and put it into operation.
Note:
Microphone capsule, sound inlet basket and foam insert
form an acoustic unit and must therefore always be
exchanged all together. Each microphone head comes
with a color-coded identification ring to distinguish
different microphone heads from each other (green =
MD 835, blue = MD 845, red = ME 865).