Filter
Top Products
Putting the RS 195 into operation
RS 195
|17
Inserting or replacing the rechargeable batteries
1 Lightly twist the ear pads counterclockwise until you overcome a slight
resistance.
2 Lift the ear pads off the ear cups to reveal the battery compartments.
3 Insert the rechargeable batteries into the compartments. To replace the
batteries, pull the batteries out of the compartments and insert the
new ones. Be sure to observe correct polarity when inserting the bat-
teries. Dispose of old batteries as special waste or return them to your
specialist dealer.
4 Hook the ear pads onto the ear cups. As you put back the ear pads,
observe the
L (left) and R (right) markings on the rear of the ear pads.
5 Twist the ear pads clockwise until you hear a click sound. Ensure that
they are locked firmly onto the ear cups.
You can also power the headphones using standard batteries (AAA
size, 1.5 V). Note however, that standard batteries are not recharge-
able, and if you are using non-rechargeable batteries, you must not
place the headphones on the headphones holder.
1
2
3
4
5
NEW