Sennheiser HMEC 26-2 Headphones User Manual


 
Important safety information
2 | HMEC 26-2
NoiseGard
TM
switched on, you can hear and recognize
these sounds. Set the volume to safe levels that do not
interfere with your ability to hear informational sounds
and warning alarms.
̈ The product is capable of producing sound pressure
exceeding 85 dB(A). In many countries 85 dB(A) is the
maximum legally permissible level for continuous noise
exposure during the working day. Do not listen at high
volume levels for long periods of time to prevent hearing
damage.
Preventing damage to the product and dysfunctions
̈ Always keep the product dry and do not expose it to
extreme temperatures (hairdryer, heater, extended
exposure to sunlight, etc.) to avoid corrosion or
deformation.
̈ Only clean the product with a soft, dry cloth.
̈ Never repair or attempt to repair a defective product
yourself. Contact your Sennheiser partner or the
Sennheiser Service Department.
̈ Only replace parts of the product whose replacement is
described in this manual. All other parts of the product
must be replaced by your Sennheiser partner.