Filter
Top Products
Using the headset
12 | HMEC 26-2
Adjusting the volume
The two slide volume controls 1 allow you to adjust the
volume for the left and right channel separately.
Switching between mono and stereo mode
The mono/stereo switch 4 allows you to switch between
mono
(
k
) and stereo (
kk
) mode, depending on the audio
system.
Changing the left and right stereo channel
The position “R” or “L” of the BOOM switch 5 corresponds to
the position of the microphone on the left or right side of the
mouth. When the microphone boom is rotated to permit left
or right side microphone orientation, the BOOM switch
allows
you to correctly assign the audio channels (L/R) to the
appropriate headphone sides
. This enables the correct
orientation of the volume controls and any stereo audio
signals.
To move the BOOM switch, use a pointed tool.
CAUTION
Hearing damage due to high volumes!
This headset is capable of producing high sound
pressure levels. Higher volumes or longer durations
can damage your hearing!
̈ Set the volume to a medium level. Make sure that
you can hear critical sounds such as warning
alarms.