Filter
Top Products
Using the headset
16 | HMEC 26-2
̈ Connect the audio cable to the 2.5 mm jack socket 8 on
the control unit I and to the corresponding jack socket on
your mobile telephone.
You can adjust the volume of the mobile telephone via the
headset’s control unit. However, the functions of the mobile
telephone cannot be controlled via the headset’s control
unit.
̈ Operate your mobile telephone as usual and observe the
instructions of the manufacturer.
The latest list of compatible mobile telephones is available on
our website at www.sennheiser.com.
Connecting an additional audio player
The 3.5 mm jack socket 6 allows you to connect and listen
to an audio player (not supplied) through the headset. For
this purpose, the
NoiseGard™ active noise compensation
must be switched on
.
CAUTION
Danger of accident due to reduced attention!
Listening to music or operating an audio device
limits your attention and may cause accidents.
̈ During flight operation, do not use the headset
for listening to additional audio sources!