Filter
Top Products
Cleaning and maintaining the HDVA 600
HDVA 600 | 14
Cleaning and maintaining the HDVA 600
̈ Disconnect the product from the mains before cleaning.
̈ Only use a dry and soft cloth to clean the product.
If a problem occurs ...
If a problem occurs that is not listed in the above table or if the problem
cannot be solved with the proposed solutions, please contact your local
Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at
www.sennheiser.com > “Service & Support”.
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the device can cause a short circuit and
damage the electronics.
̈ Keep all liquids far away from the product.
̈ Do not use any cleansing agents or solvents.
Problem Possible cause Solution Page
RCA input:
signal distorted
or too low
The sensitivity is
adjusted too high or
too low
Adjust the signal of the
analog audio source.
13
Analog
XLR-3 input:
signal distorted
or too low
The audio signal is
adjusted too high or
too low at the audio
source
Adjust the audio signal
directly at the audio
source.
-