Sennheiser EM 3731-II Stereo Receiver User Manual


 
Cleaning the receiver
40
Loading the factory-preset default settings
Via the “Reset” menu, you can reset the current settings to the factory-
preset default settings.
̈ Change to the setting mode of the “Reset” menu.
The query “Reset to factory defaults?” appears. The green backlighting
of the save button 8 flashes.
̈ Press the save button 8 until the progress bar is complete.
All settings except for the booster supply voltage, the sampling rate at
the digital output and the network address are reset to the factory-
preset default settings. The display changes to the selection mode of
the operating menu.
Cleaning the receiver
̈ Before cleaning, disconnect the product from the mains.
̈ Use a dry cloth to clean the product from time to time.
Reset
000
a
ndb
y
OFF
000
Reset to
factory defaults ?
esc
save
sync
digital audio
processing
sync
DEV
M
H
z
776.000
01.01
BANK
CH
COM
AF
HD
P
CAUTION! Liquids can damage the electronics of the receiver!
Liquids entering the housing of the product can
cause a short-circuit and damage the electronics.
̈ Keep all liquids away from the receiver.