Filter
Top Products
Using the VMX 200
14 | VMX 200
Switching the VMX 200 on/off
Switching the headset on
̈ Press and hold the multi-function button until the LED flashes blue
3 times. You hear an ascending sequence of beeps in the headset.
The LED then indicates the current operating mode.
Switching the headset off
If the headset has not been used for more than 1 hour, it automatically
switches off to conserve battery power.
̈ Press the multi-function button for 3 seconds.
You hear a descending sequence of beeps in the headset and the LED
flashes red 3 times. The headset switches off and the call is transfered
to the Bluetooth device.
LED flashes Meaning
Searching mode: The headset automatically tries to
connect to the two last connected Bluetooth devices.
Pairing mode: The headset establishes a connection to a
Bluetooth device.
Incoming call: The mobile phone transfers the call to the
headset.
Active call: The headset is just being used for an active
call.
Connection profiles and volume settings are saved automatically
when the headset is switched off.
3 s
3x
ON
2s
2s
1s
1s
3x
OFF
3 s