Filter
Top Products
5Rack LCD Console User Manual
Item Number Component Description
EXIT button 1. Pressing the EXIT button without opening the On Screen Display (OSD)
initiates an auto adjustment which reconfigures all settings for the monitor to
the optimum display values of the OSD.
2. While the OSD user interface is in use, press the EXIT button to exit the
current menu and return to the previous menu or, press the EXIT button to
leave an adjustment menu when the adjustment is complete.
3. From the Main Menu screen, pressing the EXIT button, will exit the OSD.
Left/Down Arrows button Pressing this button moves left or down through the menu and decreases the
value when making an adjustment.
Right/Up Arrows button Pressing this button moves right or up through the menu and increases the
value when making an adjustment.
MENU button 1. If the OSD user interface has not been opened, pressing the MENU button
initiates it and brings up the Main menu.
2. While the OSD user interface is in use, when a setting choice is reached,
pressing the MENU button brings up the setting’s adjustment screen.
LCD POWER button Turns on power to the LCD monitor. An LED light next to the switch will
illuminate when the monitor is in stand-by (power-saver) mode.
UPGRADE port An RJ-11 port to be used to transfer firmware upgrades from the
administrator’s server to the Rack LCD Console.
FW UPGRADE
NORMAL / RECOVERY
The Firmware Upgrade switch should be in the NORMAL position during
normal operation of the Rack LCD Console. The switch is set to RECOVERY
only when a Firmware Upgrade Recovery is performed. (See “Firmware
upgrade recovery” on page 13 for more information.)
LCD monitor The LCD display monitor of the Rack LCD Console.
RESET switch Press this recessed switch in with a small object (a pen point) to perform a
system reset.
SCROLL LOCK LED When illuminated, the SCROLL LOCK LED indicates the scroll lock function
on the keyboard is enabled.
CAPS LOCK LED When illuminated, the CAPS LOCK LED indicates the capitals lock function
on the keyboard is enabled.
NUM LOCK LED When illuminated, the NUM LOCK LED indicates the number lock function
on the keyboard is enabled.
USB port Located on the front of the Rack LCD Console, the USB port is used to connect
a peripheral device (flash drive, CD-ROM drive, or mouse) and pass through
the Rack LCD Console to the connected target device (a KVM switch or
server).