Sanyo DC-MX30 Stereo System User Manual


 
8
COMPACT DISC OPERATION
Notes when operating the CD disc
z Only press the CD Door Open button to open the CD door.
z To remove the disc, hold it by the edges and remove from the holder.
Loading Compact Disc
1. Slide the FUNCTION selector to CD position.
2. Press the OPEN button to open the CD door.
3. Place the disc into the tray with label side uppermost and push down to close
the CD door. The CD player will automatically scan the disc. The total
number of tracks will show in the display. For example, if the disc contains 17
tracks. The display will show as the figure on the right.
4. If there is no disc in the unit, the display will show “ NO”(refer to the figure on
the right).
Normal Playback
After loading a CD, press the
PLAY/PAUSE button on the main unit or on the remote control to
start playback. The track number will indicate in the display.
Pause control
To pause temporarily during CD playback, press the
PLAY/PAUSE button on the main unit or
on the remote control. The disc playback will pause. Press the
PLAY/PAUSE button again to
resume playback.
Skip track
During playback, press the
or buttons on the main unit or press F.F. or.
F.R Buttons on the remote control to skip to the previous or next tracks.
PLAY MODE CONTROL
There are three play modes. Press the PLAY MODE button once to active RPT mode, press the
PLAY MODE button twice to active RPT ALL mode, Press the PLAY MODE button third time to
active RDM mode, press the PLAY MODE button the fourth time to resume the normal playback.
Repeat a track
Select the track to be repeated and begin playback. Press the PLAY MODE button once. The RPT
indicator will show in the display and the selected track will be repeated continuously.
Repeat ALL
Press the PLAY MODE twice. The RPT ALL indicator will show in the display and all the tracks on
the disc will be repeated continuously.
Random playback
The random playback feature allows you play all the tracks on the current disc in a random
order. This function can be selected when the disc is playing or when in a stop mode. Press the
PLAY MODE button third times to random play mode. The RDM indicator is shown in the display.