Sanyo DC-MX30 Stereo System User Manual


 
10
IMPORTANT NOTE FOR MP3/CD PLAYBACK CAPABILITY
Because of none-standardized format definition / production of MP3 / CD, playback quality &
performance are not guaranteed.
SANYO is not responsible for the playability of MP3 in any case due to recording conditions
such as PC performance, writing software, media ability and etc.
MODE button the fourth time to active RPT RDM mode, Press the PLAY MODE button fifth times to
resume the normal playback.
Repeat a track
Select the track to be repeated and begin playback. Press the PLAY MODE button once. The RPT
indicator will show in the display and the selected track will be repeated continuously.
Repeat ALBUM
Select the album to be repeated and begin playback. Press the PLAY MODE button twice. The
RPT and ALBUM will flash in the display and the selected album (folder) will be repeated
continuously.
Repeat ALL
Press the PLAY MODE third times. The RPT ALL indicator will show in the display and all the tracks
on the disc will be repeated continuously.
Random playback
The random playback feature allows you play all the tracks on the current disc in a random
order. This function can be selected when the disc is playing or when in a stop mode. Press the
PLAY MODE button fourth times to random play mode. The RDM indicator is shown in the display.
If necessary, press the PLAY/PAUSE button to begin playback. The player will randomly select
a track to play from the disc.
Note: In program mode, Random playback can’t be selected.
Clear Play mode
Press the PLAY MODE button fifth times to cancel the play mode and normal playback will resume.
Programmed Playback
It is possible to program a selection of up to 20 tracks for playback.
1. After loading a disc, Press the PROGRAM button in stop mode. PGM and P01 will show in the
display.
2. Press the FOLDER+ on the main unit or FOLDER+ or FOLDER - buttons on the remote control
to select desired ALBUM (FOLDER) and then Press the
or buttons
repeatedly to select the desired track number.
3. Press the PROGRAM button to confirm the first programmed track. P02 now shows in the
display
4. Repeat steps 2 and 3 to store up to 20 tracks.
5. When programming is complete, press the
PLAY/PAUSE button to begin playback of the
selected tracks.
Clear Program (Resume Normal Playback)
Press the STOP button twice during playback, or open the CD door, or change to another mode to
erase the programmed tracks.