Sanyo CLT-D6614 Satellite Radio User Manual


 
26
HANDSET SETTING
Change ring and key tones
There is a choice of 10 polyphonic ring melodies and 4 ring tones. You can also
choose from 4 key tones.
To adjust ring volume:
1. Touch
and select the RING SETTING menu and then the RING
VOLUME submenu.
2. Use
or to select ' EXTERNAL CALL ' or ' INTERNAL CALL '. Touch
to conrm.
3. Use
or to select volume level. (Select ‘OFF’ to silence the ring tone).
4. Touch
to conrm.
NOTE:
will appear to indicate external ring tone is silenced if ‘OFF’ is
selected.
To adjust ring tone:
1. Touch
and select the RING SETTING menu and then the RING TONE
submenu.
2. Use or to select ' EXTERNAL CALL ' or ' INTERNAL CALL '. Touch
to conrm.
3. Use
or to select ring tone.
4. Touch
to conrm.
To adjust key tone:
1. Touch
and select the PHONE SETUP menu and then the KEY TONE
submenu.
2. Use
and to select key tone.
3. Touch to conrm.
Handset reception
Interference from other electrical appliances such as televisions,microwave
oven or computer should be avoided. If you are out of range or the signal is
interrupted
will disappear and ‘OUT OF RANGE’ will be displayed.
NOTE: Due to radio interference occasional loss of synchronization between the
handset and base unit may occur. If this happens the base unit will very quickly
switch to another channel automatically to restore synchronization.