Filter
Top Products
10
GB
Operating your radio – Search tuning AM/FM
1. Fully extend the antenna above the radio. Press the Standby button
to switch on your radio.
2. Press the Band button to select the required band.
3. Press and hold the Tuning up button, your radio will scan in an
upwards direction (low frequency to high frequency) and stop
automatically when it finds a station of sufficient strength.
4. After a few seconds the display will update. The display will show
the frequency of the signal found. Press and hold the Tuning
down button, and your radio will scan in a downwards direction
(high frequency to low frequency) and stop automatically when it
finds a station of sufficient strength.
5. To find other stations, press and release the Tuning Up / Down
buttons as before.
6. When the waveband is reached will recommence from the opposite
end of the waveband end.
7. Adjust the volume control by pressing the Volume up/down button to
the required setting.
7
3
2