Sangean Electronics HDT-1 Radio User Manual


 
19
Poor audio quality
(Cont.)
HD Signal Keeps Fading in and Out
Stange sound when radio is off
Antenna not correctly installed or oriented
Radio station is broadcasting poor signal
Antenna not correctly installer or oriented
Poor environmental conditions
Malfunctioning component
Using the signal strength indicator or the Carrier to Noise
indicater, try different positions and orientations of the antenna
Contact radio broadcaster to inquire about poor audio quality
See above
There are certain environmental factors that will effect
radio reception. You should always try your tuner in a
different location, alter the orientation of the antenna,
and check all connections.
If all else fails, in the advanced menu on the HDT-1X, adjust turn
“Force Analog” setting to “ON”
If the HDT-1/HDT-1X is making a stange but detectable when the
unit is on and off disconnect power immediately and contact
Sangean Service Department at 888-SANGEAN
20070425_HDT-1&HDT-1X_381R20S-A.p65 2007/4/30, ¤U¤È 01:4422