Samsung VP-D270(I) Stereo Amplifier User Manual


 
77
ENGLISHENGLISH
VP-D200i/D230i/D250i/D270i
Recording in PLAYER mode (VP-D200i/D230i/D250i/D270i only)
You can use this camcorder as a recorder.
You can record a tape from VCR or TV.
1. Connect the camcorder and VCR or TV with the
AUDIO/VIDEO cable.
2. Set the power switch of the camcorder to PLAYER
mode.
3. Turn on the VCR or TV.
4. Insert the blank tape with protection tab closed into
the camcorder.
If you want to record from a connected VCR,
insert a recorded VHS tape into the VCR.
5. Push the MENU button, move the MENU SELECTOR to
highlight A/V and push the MENU SELECTOR.
6. Move the MENU SELECTOR to highlight AV IN/OUT and
push the MENU SELECTOR to select AV IN/OUT.
7. Push the MENU SELECTOR to select AV IN.
“AV IN” and picture appear on the LCD monitor.
8. Press the START/STOP button to set the camcorder to
REC PAUSE mode.
“PAUSE” on the LCD monitor.
9. Select the TV program or playback the VHS tape.
10. Press START/STOP button to start recording.
If you want to pause recording for a while, press the
START/STOP button again.
11. To stop recording, press the (STOP) button.
Notes
When you record the images being played back on analog VCR, if they are
not being played back in normal speed, (for example, more than double
speed or slow playback), only gray image appears on the camcorder.
If you want to see the camcorder picture with a TV set AV IN/OUT menu to
OUT.
Recording in PLAYER mode
1. AV
2. PLAYER
3.
4.
VHS
5. MENU MENU
SELECTOR
A/V
MENU SELECTOR
6. MENU SELECTOR AV
IN/OUT
MENU SELECTOR
AV IN /OUT
7. AV
AV I N LCD
8. START/STOP /
REC PAUSE
PAUSE
9. VHS
10. START/STOP /
START/STOP /
11. STOP
AV IN/OUT
OUT
PLAYER
ANTENNA
S-VIDEO
S-VIDEO
A/V
TV
VCR
CAMCORDER
VIDEO
AUDIO(L)
AUDIO(R)
PLAYER MODE
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE 12
SOUND[1]
AUDIO SELECT
WIND CUT
A / V SET
PB DSE
AV IN/OUT
IN