Filter
Top Products
54
ENGLISH
5454
ENGLISH DEUTSCH
Advanced Recording
●
DATE/TIME
✤ The DATE/TIME function works in CAM, PLAYER, M.REC and
M.PLAYmodes.
✤ The date and time are automatically recorded on a special data area of
the tape.
1. Press the MENU button.
■
The menu list will appear.
2. Move the MENU SELECTOR to highlight VIEWER
and push the MENU SELECTOR.
3. Move the MENU SELECTOR to highlight DATE/TIME.
4. Push the MENU SELECTOR to select the sub-menu.
5. Using the MENU SELECTOR, select the DATE/TIME
mode.
■
You can choose to display - the OFF, DATE, TIME,
DATE/TIME
- OFF
- DATE only
- TIME only
- DATE & TIME
■
To return to the previous menu, highlight the
DATE/TIME in the middle of the menu list and
push the MENU SELECTOR.
6. To exit, press the MENU button.
Notes
■
The DATE/TIME is not affected by the OSD ON/OFF
(DISPLAY) button.
■
The DATE/TIME will read “- - -” in the following
conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera’s
memory.
- When the lithium battery becomes weak or dead.
■
Before you use the DATE/TIME function, you must set the Clock.
See CLOCK SET on page 38.
●
DATE/TIME /
✤ CAM PLAYER M.REC
M.PLAY DATE/TIME /
✤ DATE/TIME /
1. MENU
■
2. MENU SELECTOR VIEWER
MENU SELECTOR
3. MENU SELECTOR
DATE/TIME /
4. MENU SELECTOR
5. MENU SELECTOR
DATE/TIME /
■
OFF DATE
TIME DATE/TIME /
- OFF
-
DATE
-
TIME
-DATE
TIME
■
DATE/TIME
/ MENU SELECTOR
6. MENU
■
DATE/TIME / /
DISPLAY
■
DATE/TIME /
- - -
-
- DATE/TIME /
-
■
DATE/TIME /
38 CLOCK SET
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
INITIAL
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
DATE / TIME
VIEWER SET
DATE
TIME
DATE&TIME