Samsung VP-D230 Stereo Equalizer User Manual


 
ENGLISH
6464
Advanced Recording
The AUDIO DUBBING function only works in PLAYER Mode.
You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
Use the internal and external microphones or other audio equipment.
The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the camcorder.
When you wish to dub using the External A/V input, connect the
AUDIO/VIDEO cable to the camcorder by inserting the AUDIO/VIDEO cable
into the AV Jack at the right side of the camcorder.
(VP-D230i/D250i/D270i only)
- Press the MENU button, move the MENU SELECTOR to highlight A/V and
push the MENU SELECTOR.
- Move the MENU SELECTOR to highlight AV IN/OUT and push the MENU
SELECTOR to select AV IN/OUT.
- Push the MENU SELECTOR to select AV IN.
2. Press the (PLAY/STILL) button and find the timeframe of the scene to
be dubbed.
3. Press the (PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
A.DUB will be displayed on the LCD.
The camcorder is in a ready-to-dub state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
Press the (STOP) button to stop the dubbing.
Notes
You can not use the audio dubbing function while playing a write protected video tape.
You must use the external microphone jack size of below 11.5Ø.
When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio system from
which you wish to record. (VP-D230i/D250i/D270i only)
You cannot dub sound on a pre-recorded tape in LP mode or 16 bit mode.
Audio dubbing (VP-D230(i)/D250(i)/D270(i) only)
FADE
BLC
TAPE
/MF
MENU
S.SHOW
AV IN
Audio (R)Audio (L)
(VP-D230i/D250i/D270i only)
00709E VP-D230(i) UK (61~108) 12/1/03 9:09 AM Page 64