Filter
Top Products
ENGLISH
Basic Recording
2828
Making your First Recording
1. Connect a Power source to the camcorder.
(see page 23)
(A battery pack or a AC power adapter)
■
Insert a cassette. (see page 27)
2. Remove the LENS CAP.
3. Set the power switch to the CAM position.
■
Open the LCD monitor.
■
Set the mode switch to the TAPE position.
(VP-D230(i)/D250(i)/D270(i) only)
Make sure that STBY is displayed.
■
If the protection tab of the cassette is open,
STOP and PROTECTION! will be displayed.
■
Make sure the image you want to record
appears in the LCD monitor or viewfinder.
■
Make sure the battery level indicates that there
is enough remaining power for your expected
recording time.
4. To start recording, press the START/STOP button.
■
REC is displayed in the LCD.
To stop recording, press the START/STOP
button again.
■
STBY is displayed in the LCD.
FADE
S.SHOW
4
1
3
2
00709E VP-D230(i) UK (28~60) 12/1/03 9:08 AM Page 28