Filter
Top Products
21
FUNCTIONS
ENG
USB
You can play music files located on USB storage devices through the Soundbar.
AUX IN
OPTICAL IN
HDMI IN
HDMI OUT (TV)
Display
USB port
1. Connect the USB device to the USB port on the
back of the product.
2. Press the
(Function) button on the main
unit’s top panel or the SOURCE button on the
remote control to select the USB mode.
3. USB appears on the display screen.
• The Soundbar connection to the USB device is
complete.
• The Soundbar automatically turns off (Auto
Power Off) if no USB device has been
connected for more than 25 minutes.
+ Before you connect a USB device
Be aware of the following:
● If the file name of a file or folder on a USB device
exceeds 10 characters, it is not displayed on the
Soundbar's display.
● This product may not be compatible with certain
types of USB storage media.
● The Soundbar supports the FAT16 and FAT32 file
systems.
- The NTFS file system is not supported.
● Connect USB devices directly to the USB port of
the product. Otherwise, you may encounter a
USB compatibility problem.
● Do not connect multiple storage devices to the
product via a multi-card reader. It may not
operate properly.
● Digital camera PTP protocols are not supported.
● Do not remove the USB device while it is
transferring files.
● DRM-protected music files (MP3, WMA) from
commercial web sites cannot be played.
● External HDDs are not supported.
● Mobile phone devices are not supported.
● File Format Type Compatibility list:
Format Codec Sampling Rate
*.mp3
MPEG 1 Layer2
16KHz ~ 48KHz
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
*.wma
Wave_Format_
MSAudio1
Wave_Format_
MSAudio2
*.aac
AAC
16KHz ~ 96KHz
AAC-LC
HE-AAC 24KHz ~ 96KHz
*.wav
-
16KHz ~ 48KHz
*.ogg
OGG 1.1.0
*.flac
FLAC 1.1.0, FLAC
1.2.1
16KHz ~ 96KHz
● If there are too many folders and files
stored in the USB device, reading may
take some time.