22
Insert a USB drive containing the rmware upgrade into the USB port on the back of the main unit.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being
applied. The main unit will turn off automatically after completing the rmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
If the rnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported le system.
Depending on the manufacturer, the USB may not be supported.
▪
▪
▪
▪
▪
Samsung may offer upgrades for the Crystal
Surround Air Track's system rmware in the future.
If an upgrade is offered, you can upgrade the
rmware by connecting a USB drive with the
rmware upgrade stored on it to the USB port on
your Air Track.
Note that if there are multiple upgrade files, you must
load them onto the USB drive singly and use them to
upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung
call center to receive more information about
downloading upgrades files.
POWER
TV POWER
AH59-02434A
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT
SOURCE
SOUND SPEAKER
DIMMER
AUTO POWER
TV INFOTV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH
TV EXIT
DRCREPEAT
3D SOUND
VOLUME
EFFECT
TV
MUTE
POWER
TV POWER
AH59-02434A
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT
SOURCE
SOUND SPEAKER
DIMMER
AUTO POWER
TV INFOTV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH
TV EXIT
DRCREPEAT
3D SOUND
VOLUME
EFFECT
TV
MUTE
5v 500mA
5v 500mA
This button enables you to select between listening to audio from your
TV or audio from the Air Track when connected via HDMI.
Press on the remote control of this unit.
TV SPEAKER TV SPK
AVR SPEAKER HDMI
TV SPEAKER S MUTE
AVR SPEAKER TV ARC
.
Press on the remote control of this unit.
.
Press on the remote control to display the TV channel
information.
.
Press on the remote control to select the TV channel.
.
Press on the remote control to increase or decrease the volume
level.
.
Use
button to move to the previous TV channel in TV
mode.
.
To exit the TV menu, use the
button. (Functions same as the
EXIT button of the TV remote control)
The remote control can operate TVs made by SAMSUNG only.▪
POWER
TV POWER
AH59-02434A
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT
SOURCE
SOUND SPEAKER
DIMMER
AUTO POWER
TV INFOTV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH
TV EXIT
DRCREPEAT
3D SOUND
VOLUME
EFFECT
TV
MUTE
POWER
TV POWER
AH59-02434A
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT
SOURCE
SOUND SPEAKER
DIMMER
AUTO POWER
TV INFOTV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH
TV EXIT
DRCREPEAT
3D SOUND
VOLUME
EFFECT
TV
MUTE